Uses Of An Audiometer As A Diagnostic Tool In Audiometry

By Marissa Velazquez


Hear loss and other disorders related to the sense of hearing are usually monitored using an instrument called an audiometer. It is calibrated with standardized units of measure to obtain the accurate results concerning the disorder. The test requires to be done in a room that is quite and is fitted with soundproof material. The patient is usually given a set of headphones to put on the ears. He is then expected to remain seated and be calm.

The headphones are connected to a machine that produces tones under various frequencies or pitches and at different intensities or levels. The audiologist requires you to respond by rising of your hand whenever you hear a sound. This has to be done in a way that he understands when one side of the ear is not alright by raising the left hand if the left ear is okay and the same for the right ear and hand. Some professional however, provide a button that you can press. The results produced are then analyzed and recorded on an audiogram.

There are many conditions that have contributed to people losing their hearing ability. One of such condition is called acoustic neuroma. This is a slow growing tumor on the cranial nerve, which has the responsibility of the sense of hearing and balance. In addition to the loss of hearing ability, it can also cause paralysis of the face.

Sporting activities or accidents can damage the eardrum which in turn causes hear loss. Vestibulocochlear nerve is also very sensitive and when damaged can affect the ability to hear. Conditions like tinnitus and vertigo can also result to hear loss if care is not taken.

Hearing ability can be established through a number of tests. The test is always dictated by the type of patient and the reason for the test. You may encounter patients who are newborns, young children or even adults. Because children may not tell or even realize when they have hearing problems, the audiologist is then expected to use a suitable method of diagnosis. The test principle is the same for children and adults but the process may vary to get accurate results.

An otoacoustic emission test is most preferred to test babies. This is because the test is simple to carryout, takes a very short time and the child feels no pain. It involves the placing in the childs ear a tiny earpiece attached to a microphone and a loudspeaker. A clicking sound is then produced by the speaker, which is transmitted to the cochlea. If the cochlea is functioning properly, the sound will be sent back to the ear canal and picked by the microphone.

If the sound is not heard, there could be a problem with the ear though the audiologist has to rule out other factors. If the child was not steady, he could have interrupted the process of testing and also a noisy room can also affect the results. If the test is repeated and no change is seen then an automated auditory brainstem response test is done to give accurate results.

Reinforcement audiometry is the technique recommended for testing young children. Using speakers, sound is relayed to the testing room and the child is expected to respond by turning towards the direction of sound. The audiologist rewards the child to motivate him as he performs the test repeatedly. The frequencies are altered at different levels to establish if the child can pick even the lowest sound. Testing older children and adult is different as a pure tone audiometry technique is employed. This includes the use of an audiometer to transmit sounds through a headphone in varied pitches and levels.




About the Author:



No comments:

Post a Comment